Since this pack is for a specific application please note it has limited availability. This means we will not have these made as frequently as our other packs.
Click on the connector in the connector selection to see a picture of the connector option if one is needed
We are pleased to offer a new line up of speed run and drag racing packs. These use our new True Spec Extreme Graphene V2 formulation which you can read up on by clicking here. These packs have been designed to optimize power to weight ratio. These packs have the highest possible performance in the market based on their weight/size to power ratio. If you are serious about speed runs or drag racing then these are must have packs.
To keep the weight as low as possible these are regular softcase packs with no G10 protection plates. To lower the resistance these have 8AWG wires and come with no connectors. We do offer connectors in the drop down menu but many who do speed runs/drag racing tend to use different connectors.
Due to the extreme nature of speed runs and drag racing please note there is no warranty on these packs. Each pack is tested prior to shipping out to make sure it is free of manufacturing defects.
The 4000mAh-2S and 3S are intended for drag racing. The 6400-2S will give better results in drag racing if you can make close to minimum weight.
- 8AWG wires soldered straight to the tabs for lowest possible resistance.
- Built with wide tab cells for lowest possible internal resistance.
True mAh +/- 5%: 4000mAh
C rate: 150C
Power Factor: PF389 For more information click here
Size: 23.5mm x 45mm x 138mm softcase
Weight: 300gr +/- 5gr.Wire size: 8AWG
Charge rate: 1C to 5C please note that a higher charge rate will put less mAh into the pack and will reduce cycle life
|C Rate||150C 389 Power Factor|
|Configuration||3S1P Soft case|
|Length||138mm / 5.43in|
|Height||23.5mm / 0.925in|
|Weight||300gr / 10.58oz|
True Spec Extreme Graphene V2 11.1V-4000mAh-150C Softcase Drag Racing pack
- Product Code: 40389-3S1P
- Availability: In Stock